Removing the trim on the rear bumper panel
Preliminary work
- Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to IF INSTALLED: REMOVING EMERGENCY WHEEL .
- Refer to REMOVING THE LOADING EDGE TRIM .
- Refer to REMOVING FRONT LUGGAGE COMPARTMENT WELL .
- Refer to PARTIALLY REMOVING LEFT AND RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to REMOVING THE TRIM FROM THE LEFT AND RIGHT WATER CHANNELS .
- Refer to REMOVING THE TAIL LIGHT ON THE LEFT AND RIGHT SIDE PANEL .
- Refer to REMOVE REAR BUMPER PANEL .
- Unclip the trim of the rear bumper cover (2)
from all the detents (3)
of the rear bumper cover (1)
.
- Release the trim of the rear bumper cover (2) from the guides (3) at left and right and feed out of the rear bumper cover (1) .