Installing the pedestrian protection sensor

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Check the impact absorber (2) for damage and replace if necessary.
Carefully insert the active pedestrian protection (1) into the impact absorber (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Connect connectors (1) and lock.
Hook the impact absorber (2) into place below and press upwards.

G14645974

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSERT TOP AUTOMATIC AIR FLAP CONTROL .
Refer to INSTALLING BUMPER COVER, FRONT .
Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
Refer to PARTIALLY INSTALLING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
Refer to INSTALLING CENTER RADIATOR GRILLE .
Refer to INSTALLING THE COVER FOR CENTER ENGINE COMPARTMENT .
Refer to INSTALLING THE FRONT HOOD SEAL .
Refer to CONNECTING NEGATIVE BATTERY CABLE OF THE SYSTEM BATTERY
Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .