Installing the headlining (lowered)
- Install the end support of the sun visors (1)
in the headlining and mount it with clamps (2)
.
- Check the clips (1)
on the headlining (2)
for damage and replace, if necessary.
- Feed in the headlining (1) with the help of an support person on the respective edge protection.
- Position and clip in the headlining (2)
at the clips (1)
.
- Clip in the clips (2) on the headlining (1) .
Follow-up work
- Refer to INSTALLING THE COVERS FOR THE INTERIOR MIRRORS .
- Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
- Refer to INSTALLING THE HANDS-FREE MICROPHONE .
- Refer to INSTALLING FRONT VANITY MIRROR LIGHT .
- Refer to INSTALLING THE COUNTER SUPPORT FOR THE SUN VISOR .
- Refer to INSTALLING THE SUN VISOR .
- Refer to INSTALL A-PILLAR TRIM PANEL .
- Refer to INSTALL B-PILLAR TRIM PANEL .
- Refer to INSTALLING THE HOLDER ON LEFT OR RIGHT .
- Refer to INSTALLING INTERIOR ROOF LIGHT .
- Refer to INSTALLING C-PILLAR TRIM PANEL .
- Installing the trim of the auxiliary brake light.
Check
Check the clips (3) for damage and replace if necessary.
Check the locks (2) and guides (4) for damage.
Result
The lock or guide is damaged.
Replace the trim of the auxiliary brake light.
Trim of the 3rd Position the brake light (3) from below and clip in with the locks (2).
Clip in clips (1).