Remove Soft-close motor

Preliminary work 

• Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to IF INSTALLED: REMOVING EMERGENCY WHEEL .
• Refer to REMOVING THE LOADING EDGE TRIM .
• Refer to REMOVING FRONT LUGGAGE COMPARTMENT WELL .
• Refer to REMOVING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON LEFT .

• Unclip the Bowden cable (1)  from the tailgate lock (2)  and guide it out.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Disconnect plug connection (1)  .
• Unclip the Bowden cable (2)  from the brackets at the tail panel.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lever out and remove the soft-close motor (1)  from the brackets (2)  in the arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.