Installing air duct trim

NOTE: Description is for left component only. Procedure on the right side is identical.

Position the air duct trim (2) at the front bumper and engage at the detents (1) .

G14642995

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALL BUMPER COVER, FRONT .
Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
Refer to PARTIALLY INSTALLING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
Refer to INSTALL CENTER RADIATOR GRILLE .
Refer to INSTALLING THE COVER FOR CENTER ENGINE COMPARTMENT .
Refer to INSTALLING THE FRONT HOOD SEAL .