Install all ignition coils
NOTE:
The description is for one component only. The procedure is identical for all further components.
Install ignition coil
- Install ignition coil (3) .
- Tighten down screw (2) .
TIGHTENING TORQUE SPECIFICATION
| Ignition coil | ||
| screw | Tightening torque | 8 Nm |
- Connect connectors (1)
and lock.
The connector (1) must engage audibly.
- Connect the connector (1)
with the holder (2)
and lock (arrow).
The connector (1) must engage audibly.
- Connect connectors (1) and lock.
The connector (1) must engage audibly.
Follow-up work