Installing bottom front cover from the side

• Install the bottom front cover at side (2).
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Lower side cover at front
  Hexagon screw for thermoplastic	Tightening torque	3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Precondition 

Front underbody protection removed.

• Position the bottom front cover from the side (2).
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Lower side cover at front
  Hexagon screw for thermoplastic	Tightening torque	3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.