Releasing the wishbone on the left and right from the swivel bearing

NOTE: Description is for left component only. Procedure on the right side is identical.

Releasing the wishbone from the swivel bearing

Release nut (1). If necessary, counter support at the Torx socket.
Release wishbone (2) from swivel bearing (3).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Otherwise, the rubber grommet can be damaged. The components must not be in contact.
Make sure the rubber grommet (3) on the bottom wishbone (1) does not get damaged by the swivel bearing (2).

Courtesy of BMW OF NORTH AMERICA, INC.