Attaching the anti-roll bar link on the anti-roll bar at left and right

Securing the anti-roll bar link to the anti-roll bar 

• Position the anti-roll bar link (3) on the anti-roll bar (2).
• Replace nut (1).

  Parts:  Nut

• Tighten nut (1). If necessary, counter support at the Torx socket.
  TIGHTENING TORQUE SPECIFICATION
  
  

  Front anti-roll bar link to anti-roll bar/spring strut
  M10 Replace nut.	tightening torque  56 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.