Removing the clean air pipe with the resonator

WARNING: High-voltage system .
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!

All work on the high-voltage system may only be carried out by specially trained and technically experienced personnel.
For additional information see:
SAFETY INSTRUCTIONS ON HANDLING HYBRID CARS .
For additional information see:
NOTES ON REPAIR OF HIGH-VOLTAGE BATTERY UNIT .

Preliminary work

Refer to REMOVING THE ACOUSTIC COVER .

WARNING: Hot surfaces.
Risk of burning!

Perform all work only on components that have cooled down.

Unlock the locks (1).
Feed the engine ventilation line (2) out and set it aside.

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock plug connection (1) and disconnect.
Loosen clamp (2).
Unfasten clamp (3).
Disconnect the clean air pipe with resonator from the intake filter housing.

Courtesy of BMW OF NORTH AMERICA, INC.
Press and hold the clean air pipe with the resonator (1) in arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.
Version A:
Unlock and disconnect the tank ventilation line (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen the clamp (arrow).
Unlock plug connection (1) and disconnect.
Unlock the clamp (2).
Feed the clean air pipe out with the resonator (3) and remove it.

Courtesy of BMW OF NORTH AMERICA, INC.
Version B:
Unlock plug connection (1) and disconnect.
Loosen clamp (2).
Unlock and detach the line (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock the clamp (1) and snap it in this position.

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock the clean air pipe with the resonator (1) and detach it.
Feed the clean air pipe out with the resonator (1) and remove it.

Courtesy of BMW OF NORTH AMERICA, INC.