If installed: Partially release the engine oil cooler

WARNING: Hot surfaces .
Risk of burning!

NOTE: TECHNICAL INFORMATION
The work must be performed with vehicle care to prevent component damage.

Loosen screws (1).
Drill out the left rivet (2).
Remove the left damper (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock lock (1).
Feed out the engine oil cooler (2) from the bracket (3) in the arrow direction and place to one side.

Courtesy of BMW OF NORTH AMERICA, INC.
Fix the engine oil cooler (1) with a cable tie (2) as shown.

Courtesy of BMW OF NORTH AMERICA, INC.