Remove rear spoiler
NOTE:
TECHNICAL INFORMATION
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE .
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE .
NOTE:
RISK OF DAMAGE
Mechanical effects .
Paint damage .
Mechanical effects .
Paint damage .
- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
- Feed in the separating cord (approx. 50 cm) from the special tool 2 357 248 in the special tools 2 326 501 .
- Insert the separating cord carefully starting from below the rear spoiler (1).
- Carefully release the rear spoiler (1) with the special tool 2 326 501 by pulling movement from the tailgate and remove it upwards.
- Remove the adhesive residues from the tailgate.