Remove guide for rear center bumper cover

• Unclip clips (1).
• Release vehicle wiring harness (2) on the left side of the guide for the bumper cover, rear center.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unclip the connector housing (2).
• Unclip clips (1).
• Release the vehicle wiring harness (3) on the right side of the guide for the bumper cover, rear center.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the vehicle wiring harness (1) from all the holders.
• Unclip clip (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen nuts (1).
• Removing guide for rear center bumper cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.