Installing the body pillar trim panels of the two body pillars on the rear left and right

NOTE: Description is for left component only. Procedure on the right side is identical.

Check if the clip (2), foam material (3) or detents in areas (4) of the body pillar trim panel (1) are damaged or missing and replace damaged or missing parts as needed.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the body pillar trim panel (2) with the detents in areas (4).
Attach the body pillar trim panel (2) with the clip (3).
Tighten down screw.

TIGHTENING TORQUES SPECIFICATIONS

Body pillar trim panel to body
Tightening torque		2.3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.