Install both sun visors and counter supports
NOTE:
Description is for left component only. Procedure on the right side is identical.
Install the sun visor and the counter support
- Position the sun visor and, if necessary, connect the corresponding plug connection.
- Replace screws.
Parts: Screws
- Tighten down screws.
TIGHTENING TORQUES SPECIFICATIONS
| Sun visor to body | ||
|---|---|---|
| Oval-head self tapping screw Replace screw. |
Tightening torque | 2.3 Nm |
- Clip in the corresponding covers (arrows).
- Position the counter support.
- Replace screw.
Parts: Screw
- Tighten down screw.
TIGHTENING TORQUES SPECIFICATIONS
| Sun visor counter support to body | ||
|---|---|---|
| Oval-head self tapping screw Replace screw. |
Tightening torque | 2.3 Nm |
- Clip in the corresponding cover (arrow).
- Hook the sun visor into the counter bearing.