Install the rear section of the front wheel arch cover
NOTE:
To provide a better overview: Schematic diagram without front wheel.
- Install the rear section of the front wheel arch cover.
- Tighten the screws (1).TIGHTENING TORQUES SPECIFICATION
Wheel arch cover, front Hexagon screw Tightening torque 2.6 Nm - Tighten nut (2).TIGHTENING TORQUES SPECIFICATION
Wheel arch cover, front Hexagon nut Tightening torque 3 Nm - Tighten plastic nuts (3).TIGHTENING TORQUES SPECIFICATION
Wheel arch cover, front Plastic nut Tightening torque 2 Nm