Installing the body pillar trim panels of the two body pillars in the rear

Check if the clip (2), foam material (3) or detents in areas (4) of the body pillar trim panel (1) are damaged or missing and replace damaged or missing parts as needed.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the body pillar trim panel (2) with the detents in areas (4).
Attach the body pillar trim panel (2) with the clip (3).

Tighten down screw.

TIGHTENING TORQUES SPECIFICATION

Body pillar trim panel to body
Tightening torque	2.3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.