61 31 043 Remove and install roof switch center
Special tools required:
- 00 9 325
IMPORTANT:
Follow notes for handling light bulbs (INTERIOR LIGHTING)
.
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .
Carefully unclip and remove the trim (1) using special tool 00 9 325 .
Installation note:
Ensure cover (1) is correctly seated.
Unlock left/right retaining lugs (1) with screwdriver (2) in arrow direction.
Remove roof switch cluster (3).
Unlock plug connections underneath and disconnect.
Installation note:
Retaining lugs (1) must not be damaged.
Make sure roof switch cluster (3) is correctly fitted.
IMPORTANT:
Disconnecting the plug connection for the SOS emergency call button results in fault entries in the telephone control unit (restriction in the emergency call system).
After installation, read out fault memory and if necessary delete fault code entry.
If necessary, INITIALIZE sliding/tilting sunroof.
After installation, read out fault memory and if necessary delete fault code entry.
If necessary, INITIALIZE sliding/tilting sunroof.