3712 Rear Shock Absorbers (X6 M 2020-2023)
3712 TIGHTENING TORQUE OVERVIEW
| Wiring harness for active stabilizer to right-hand retainer | ||
| M6 | tightening torque | 8 Nm |
| Wiring harness for active stabilizer to right rear axle support | ||
| M6 | tightening torque | 8 Nm |
| Rear spring strut/air suspension on camber control arm | ||
| M14 Replace screw and nut. Tighten in normal position. |
Joining torque | 165 Nm |
| Angle of rotation | 90° | |
| Rear spring strut/air suspension on body | ||
| M10 Replace screw. |
Joining torque | 56 Nm |
| Angle of rotation | 90° | |