Install coolant line between coolant pump and heat exchanger

Replace O-ring (1) in the coolant pump.
Parts: O-ring

Courtesy of BMW OF NORTH AMERICA, INC.
Guide in coolant line and lock.
Connect coolant line to retaining clip (2) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Installing the left throttle body

Prepare the throttle body
Replace the seal (1).
Parts: Seal

Courtesy of BMW OF NORTH AMERICA, INC.
Replace sealing ring (2).
Parts: Sealing ring
Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Position throttle body (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATION

Throttle body to intake manifold
screw	Tightening torque	7 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Fix wiring harness mounting (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the heater return
Position the heater return (2) in the coolant pump.

Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATION

Heater return
M6x18	Tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.