Install the lower oil pan section
- Clean the sealing surface in area (1).
- Remove the seal (1).
- Clean sealing surfaces.
- Position seal on the lower oil pan section.
Parts: Gasket
- Position the lower oil pan section (2).
- Replace screws.
Parts: Screws
- Tighten the screws in this area (1).
TIGHTENING TORQUE SPECIFICATION
| Lower oil sump section | ||
|---|---|---|
| M6x25 Replace screws. |
Tightening torque | 10 Nm |
- Connect plug connection (2) and lock.
- Attach the cable clip (1).
- Position sealing ring (1) on the oil drain plug (2).
Parts: Sealing ring
- Tighten oil drain plug (2).
TIGHTENING TORQUE SPECIFICATION
| Oil drain plug on oil sump | ||
|---|---|---|
| M18x1.5 Replace the sealing ring. |
tightening torque | 40 Nm |
- F90/F91/F92/F93
- Turn the oil filler cap (1) counterclockwise and open it.
- Pour in engine oil.
TECHNICAL DATA SPECIFICATION
| Engine oil S63B44T4 | |
|---|---|
| Filling capacity, motor oil change with oil filter element | 10 l |
- Turn the oil filler cap (1) clockwise and shut it.
- F90/F91/F92/F93
NOTE:
RISK OF DAMAGE
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .
- Adhere to the utmost cleanliness.
- Protect components from contamination e.g. by covering.
- Close off line connections with seal plugs.
NOTE:
RISK OF DAMAGE
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .
- Adhere to the utmost cleanliness.
- Protect components from contamination e.g. by covering.
- Close off line connections with seal plugs.
- Open the oil filler cap (1).
- Pour in engine oil.
TECHNICAL DATA SPECIFICATION
| Engine oil S63B44T4 | |
|---|---|
| Filling capacity, motor oil change with oil filter element | 10 l |
- F95/F96
NOTE:
RISK OF DAMAGE
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .
- Adhere to the utmost cleanliness.
- Protect components from contamination e.g. by covering.
- Close off line connections with seal plugs.
- Close the oil filler cap (1).
Follow-up work
- Refer to TIGHTENING THE OIL DRAIN PLUG .
- Refer to REMOVING THE OIL FILLER CAP .
- Refer to FILLING ENGINE OIL .
- Refer to INSTALLING THE OIL FILLER CAP .
- Refer to CHECKING ENGINE OIL LEVEL .
- Refer to INSTALLING THE STIFFENING PLATE .