Install the ornamental grille on the bumper cover on the side

NOTE: Description is for left component only. Procedure on the right side is identical.

Correctly position the ornamental grille (1) and snap into place on the detents (arrows).

G15176876

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING FOG LIGHT SUPPORT .
Refer to INSTALLING THE TRIM ON THE CENTER ORNAMENTAL GRILLE .
Refer to INSTALLING FRONT BUMPER COVER .
Refer to INSTALLING THE FRONT PART OF THE LEFT FRONT AND RIGHT WHEEL ARCH COVER (PARTIALLY REMOVED) .
Refer to INSTALLING THE LEFT AND RIGHT FRONT WHEEL ARCH TRIM (PARTIALLY REMOVED) .
Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
Refer to PUTTING THE FRONT RADAR SENSORS INTO OPERATION .