Installing illuminated front sill trim on the door sill

NOTE: RISK OF DAMAGE 
Bending of plastic components. 
Application of too much force can lead to bending of plastic components. 

• Place special tool directly beside the mounting clip.
• Continue unclipping the part without using the tool if possible.

• Check the detents (2)  for damage, if necessary replace the illuminated sill trim (1)  .
• Mount the illuminated sill trim (1)  and connect and lock the connector while doing so.
• Position the illuminated sill trim (1)  and lock on the detentes (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.