Installing the left and right reflector
Installing rear reflector
NOTE:
Description is for left component only. Procedure on the right side is identical.
Check
- Check the mounting clip (1), detents (2) and the guide (3) on the rear reflector (4) for damage.
Result
» The mounting clip (1), detents (2) or the guide (3) are damaged.
Measure
- Replace rear reflector (3).
Parts: Rear reflector
- Connect connector (1) at rear reflector (2) and lock.
- First, place the rear reflector (1) in the marked area, then engage it at the top in the bumper cover.