Removing engine ventilation line of cylinder bank 2
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER .
- Refer to REMOVING THE INTAKE FILTER HOUSING ON THE LEFT .
- Refer to REMOVING THE LEFT INTAKE SILENCER BRACKET .
- Refer to PARTIAL UNINSTALLATION OF THE ENGINE VENTILATION LINE OF CYLINDER BANK 2 .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Loosen screws (1).
- Guide out engine ventilation line (2) to the top.