Installing the front-end strut

• Install the front-end strut (4).
• Tighten the screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Front-end strut to strut brace
  Torx screw M8x30	Snug torque	28 Nm
  	Angle of rotation	90°

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Front-end strut to upper rear connection
  Torx screw M8x30	Snug torque	28 Nm
  	Angle of rotation	90°
  Hexagon screw M10x35	Tightening torque	50 Nm

• Tighten the screws (3).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Front-end strut to upper rear connection
  Torx screw M8x30	Snug torque	28 Nm
  	Angle of rotation	90°
  Hexagon screw M10x35	Tightening torque	50 Nm

Follow-up work 

• Refer to INSTALLING ACOUSTIC COVER .
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT AND RIGHT .