Installing rear door trim panel

• Check whether the clips (1) are present and have damage.

  Damaged or missing clips (1) must be replaced.

  The clips (1) must not be engaged. The disengaged state is shown.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the door trim panel.
• Attach the Bowden cable (1) of the door opener on the door lock (3).
• Attach the Bowden cable (1) of the door opener on the counter support (2).
• Connect connectors (4) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the door trim panel (1) on the window channel strip.
• Clip in the door trim panel (1) onto the clips (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Door trim panel
  screw	Tightening torque	5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screw and mount the cover (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Door trim panel
  screw	Tightening torque	5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screw and mount the cover (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Door trim panel
  screw	Tightening torque	5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Tightening the screws on the rear handle (G06) 

• Tighten the screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Door trim panel
  screw	Tightening torque	5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the covers (1).

Courtesy of BMW OF NORTH AMERICA, INC.