37 12 Control And Suspension Elements, Rear (X5 M)
3712 TIGHTENING TORQUE OVERVIEW
| Rear spring strut/air suspension on body | ||
| M10 Replace screw. |
Joining torque | 56 Nm |
| Angle of rotation | 90° | |
| Rear spring strut/air suspension on camber control arm | ||
| M14 | Joining torque | 165 Nm |
| Replace screw and nut. Tighten in normal position. |
Angle of rotation | 90° |
| Wiring harness for active stabilizer to right-hand retainer | ||
| M6 | tightening torque | 8 Nm |
| Wiring harness for active stabilizer to right rear axle support | ||
| M6 | tightening torque | 8 Nm |