Connecting the exhaust system
- Replace the seals (1)
.
Parts: Seals
- Position exhaust system.
- Replace nut (1)
.
Parts: Nut
- Tighten nut (1)
.TIGHTENING TORQUES SPECIFICATION
Exhaust bracket to transmission Nut M8
Replace nuts.Tightening torque 19 Nm - Replace nuts (2)
.
Parts: Nuts
- Tighten nuts (2)
.TIGHTENING TORQUES SPECIFICATION
Exhaust system to catalytic converter Nut M8 Replace nuts. Tightening torque 10 Nm Tightening torque 28 Nm - Replace nut (1)
.
Parts: Nut
- Tighten nut (1)
.TIGHTENING TORQUES SPECIFICATION
Exhaust bracket to transmission Nut M8 Replace nuts. Tightening torque 19 Nm - Replace nuts (2)
.
Parts: Nuts
- Tighten nuts (2)
.TIGHTENING TORQUES SPECIFICATION
Exhaust system to catalytic converter Nut M8
Replace nuts.Tightening torque 10 Nm Tightening torque 28 Nm - Clip the pressure line (2) into the holder (1) .
- Tighten the union nuts (3)
.TIGHTENING TORQUES SPECIFICATION
Pressure line union nut Pressure line union nut Tightening torque 40 Nm - Clip the pressure line (2) into the holder (1) .
- Tighten the union nuts (3)
.TIGHTENING TORQUES SPECIFICATION
Pressure line union nut Pressure line union nut Tightening torque 40 Nm