Installing the Bowden cable of the front hood locks

• Install the Bowden cable bracket (2) together with the Bowden cables.
• Attach the Bowden cable (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  Clip in the Bowden cable bracket (1) into the body.

  Close the lid (2) and engage with the retaining lugs (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE LEFT AND RIGHT HOOD LOCK .
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT and INSTALL THE COVER IN THE ENGINE COMPARTMENT ON THE TOP RIGHT .