Installing the ultrasonic sensor for the Parking Maneuvering Assistant (PMA) at the front

• Correctly position the ultrasonic sensor snap in the (3)  detent (1)  .
• Connect connectors (2)  and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TRIM ON THE SIDE LEFT AND RIGHT BUMPER COVER .
• Refer to INSTALLING THE ORNAMENTAL GRILLE OF THE BUMPER PANEL ON THE LEFT AND RIGHT SIDE .
• Refer to INSTALLING THE ORNAMENTAL GRILLE ON THE CENTER BUMPER PANEL .
• Refer to INSTALLING THE TRIM ON THE FRONT BUMPER COVER .
• Refer to INSTALLING THE FOG LIGHT BRACKET ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE TRIM ON THE CENTER ORNAMENTAL GRILLE .
• Refer to INSTALLING FRONT BUMPER COVER .
• Refer to PARTIALLY INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER ON THE LEFT AND RIGHT .
• Refer to PARTIALLY INSTALLING THE LEFT FRONT AND RIGHT WHEEL ARCH TRIM .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
• Refer to INSTALLING THE NUMBER PLATE BASEPLATE FOR THE FRONT NUMBER PLATE .