Installing the trim on the front bumper cover

• Correctly position the trim (2)  and engage at detents (arrows).
• Install the cover (1)  and engage it at the detent.
• Connect and lock the connector on the ultrasonic sensors.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FOG LIGHT SUPPORT .
• Refer to INSTALLING THE TRIM ON THE CENTER ORNAMENTAL GRILLE .
• Refer to INSTALLING FRONT BUMPER COVER .
• Refer to PARTIALLY INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER ON THE LEFT AND RIGHT .
• Refer to PARTIALLY INSTALLING THE LEFT FRONT AND RIGHT WHEEL ARCH TRIM .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
• Refer to INSTALLING THE NUMBER PLATE BASEPLATE FOR THE FRONT NUMBER PLATE .