Removing the engine from the assembly jig

CAUTION: Heavy component.
Heavy components can lead to injury or damage.

Remove and install heavy components with the aid of another person/other persons.

Prepare the special tool 2 220 718 .

Courtesy of BMW OF NORTH AMERICA, INC.
Keep the special tool 0 490 561 (11 0 000) ready.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
The workshop crane, lifting equipment, and mounting brackets on the engine must be connected to each other in such a way that the engine hangs straight when being lifted.
Connect both hooks of special tool 0 490 561 (110 000) front with special tool 2 459 012 and rear on the engine with the mounting brackets.
Connect the special tool 2 220 718 to special tool 0 490 561 (110000).

Courtesy of BMW OF NORTH AMERICA, INC.
Slacken nuts (1).
Unlock the clamping jaws of the special tool 2 413 082 in arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.
Raise the engine slowly.

Courtesy of BMW OF NORTH AMERICA, INC.
Unscrew the screws (marks) and remove the special tool 2 411 718 .

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and install the engine support bracket (1) at the right.

Tighten screws (arrows).

TIGHTENING TORQUE SPECIFICATION

Transmission mounting bracket to transmission
M10	Tightening torque	38 Nm

Courtesy of BMW OF NORTH AMERICA, INC.