LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2020
>>
X4 M Competition
>>
Repair and Diagnosis
>>
General Information
>>
OEM General Information
>>
General Orphan Data (1 Of 2)
>>
Partially install auxiliary coolant pump
Partially install auxiliary coolant pump
Check rubber mount (3) for damage and, if necessary, replace the rubber mount.
Guide the lower auxiliary coolant pump (2) correctly into rubber mount (3).
Tighten the nut (1) on the auxiliary coolant pump (2).
TIGHTENING TORQUE SPECIFICATION
Electric coolant pump to holder
M6
tightening torque
8 Nm
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.