Connecting the coolant line to the high-temperature coolant radiator
NOTE:
TECHNICAL INFORMATION
Make sure that the connections are locked correctly. The locks must engage audibly.
Make sure that the connections are locked correctly. The locks must engage audibly.
- Check the sealing rings (1) of the coolant lines (2) for damage and replace them if necessary.
- Connect the bottom right coolant hose (1) to the high-temperature coolant radiator and audibly lock it into position.
Follow-up work
- Install intake filter HOUSING .
- Install the right FRONT-END STRUT .
- Install ACOUSTIC COVER .
- Fill the HIGH-TEMPERATURE COOLING SYSTEM with the vacuum fill equipment.
- Vent the HIGH-TEMPERATURE COOLANT SYSTEM .
- Check the HIGH-TEMPERATURE COOLING SYSTEM for water tightness.
- Install the front bottom right wheel arch COVER .
- Install the front UNDERBODY PROTECTION .