Removing the cover of the front bumper cover

Preliminary work 

• Remove front ORNAMENTAL GRILLE .
• Partially remove both front wheel ARCH TRIMS .
• Partly remove the front sections of both front wheel ARCH COVERS .
• Remove front bumper COVER .
• Remove the front bumper cover ORNAMENTAL GRILLE .

• Loosen screw (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: The description is for one component only. The procedure is identical for all further components.
• Unlock the detents (1).
• Remove the ultrasonic sensor (2) and let it hang on the wiring harness.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the cover (1) at the detents (2) along the dotted line and remove it.

Courtesy of BMW OF NORTH AMERICA, INC.