Remove the bumper cover lower section

Preliminary work 

• Remove front ORNAMENTAL GRILLE .
• Partially remove both front wheel ARCH TRIMS .
• Partly remove the front sections of both front wheel ARCH COVERS .
• Remove front bumper COVER .
• Remove the front bumper cover ORNAMENTAL GRILLE .
• Remove the front license plate number PLATE BASEPLATE ..

• Disconnect the connector (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).
• Release and remove bumper cover lower section (2) from the detents.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slightly spread detents (1) and remove the ultrasonic sensors (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unclip cover (1) of the towing eye from the detents (2) and (3).
• Thread out the tether and remove the cover (1) of the towing eye.

Courtesy of BMW OF NORTH AMERICA, INC.