Install the trim panel of the luggage compartment in front

NOTE: Description is for left component only. Procedure on the right side is identical.

• Position trim panel (2) of the luggage compartment.
• Tighten the screws (1).

TIGHTENING TORQUES SPECIFICATION

Luggage compartment trim panel to body
Thermoplastic ovalhead screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

• Check clamps (1) for damage; replace if necessary.

  Clamps (1) must not be missing or damaged.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the cover (1) of the trim panel of the luggage compartment correctly and press it into the clamps (2).

Courtesy of BMW OF NORTH AMERICA, INC.