Fit the roof lining
- Place the headlining (1) through the tailgate cutout into the vehicle with the aid of an support person.
- Feed in the headlining (1) with the help of an support person on the respective edge protection.
- Position and clip in the headlining (1) at the clips (2).
- Insert the wiring harness (3). Connect plug connections and attach the cable clips.
- Clip in the headliner (1) on the clips (2).
Follow-up work
- Install left hands-free MICROPHONE .
- Install the right hands-free MICROPHONE .
- Install ROOF FUNCTION CENTER (FZD).
- Install both vanity mirror LIGHTS .
- Install left and right sun visor counter SUPPORTS .
- Install the left and right SUN VISORS .
- Install left and right a-pillar TRIM PANEL .
- Install the interior REARVIEW MIRROR .
- Install the interior rearview mirror COVERS .
- Install rear interior ROOF LIGHT .
- Install all GRAB HANDLES .
- Partially install the top left and right b-pillar TRIM PANELS .
- Install front left and right HEAD RESTRAINTS .
- Install the locking clip of the rear SEAT BACKREST .
- Install the front luggage compartment TRIM PANEL .
- Install the rear luggage compartment TRIM PANEL .
- Install left luggage compartment wheel arch TRIM PANEL .
- Install the seat belt finisher strip COVER .
- Install both c-pillar TRIM PANELS .
- Install both d-pillar TRIM PANELS .
- Install the backrest side section on the rear seat BACKREST .
- Install the flap in left luggage compartment TRIM PANEL .
- Install luggage compartment ROLLER COVER .