Installing The Head-Up Display

• Connect the associated connector with the head-up display.
• Guide the Head-Up Display (2) into the support.
• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install instrument PANEL TRIM .
• Install the INSTRUMENT CLUSTER  (KOMBI).
• Install the steering column SWITCH CLUSTER (SZL).
• Fit steering column upper section SHROUD .
• Install steering column lower section SHROUD .
• Install STEERING WHEEL .
• Install the M sports steering wheel AIRBAG UNIT .
• Install the steering wheel or sports steering wheel AIRBAG UNIT .
• Install the light OPERATING UNIT .
• Install the left dashboard SIDE PANEL .
• Install the right dashboard SIDE PANEL .
• Install left and right a-pillar TRIM PANEL .
• Install left fold-out COMPARTMENT .
• Install the left dashboard DECORATIVE STRIP .
• Install HEAD UNIT .
• Install radio operating unit and air conditioning CONTROL PANEL .
• Install the right dashboard DECORATIVE STRIP .
• Install the CENTRAL INFORMATION DISPLAY (CID).
• Install center of dashboard DECORATIVE STRIP .
• Install right GLOVE COMPARTMENT .
• Install the CENTER CONSOLE .
• Install the right footwell TRIM PANEL .
• Install the pedal assembly TRIM PANEL .
• Install the front STORAGE COMPARTMENT .
• Install the center console TRIM .
• Install the rear center console TRIM .
• Reconnect all battery GROUND LEADS .
• ENCODE/PROGRAM control unit(s).
• Activate the 48 v ELECTRICAL SYSTEM .