Removing the tandem brake master cylinder.
NOTE:
TECHNICAL INFORMATION
Use only BMW-approved brake fluids.
For additional information see: Operating fluid-ANL-SBS1996-340396150...
Use only BMW-approved brake fluids.
For additional information see: Operating fluid-ANL-SBS1996-340396150...
Preliminary work
- Refer to REMOVING THE COVER OF THE ENGINE COMPARTMENT AT THE REAR LEFT .
- Refer to REMOVING THE COVER OF THE REAR RIGHT ENGINE COMPARTMENT .
- Refer to REMOVING LEFT AND RIGHT WIPER ARM .
- Refer to REMOVING THE COWL COVER .
- Refer to PARTIALLY REMOVING THE MOUNT OF THE HOOD SEAL ON LEFT AND RIGHT .
- Refer to REMOVING TRAILING LINK AT SPRING BOLT .
- Refer to REMOVING EXPANSION TANK .
- (1) Unfasten brake lines.
- Loosen nuts (2) and remove tandem brake master cylinder (3).