Removing the cover on the rear bumper cover

Preliminary work 

• Refer to REMOVING THE FLAP IN THE LUGGAGE COMPARTMENT TRIM PANEL ON THE RIGHT .
• Refer to REMOVING FLAP IN LUGGAGE COMPARTMENT TRIM PANEL ON RIGHT .
• Refer to REMOVING BOTH TAIL LIGHTS FROM THE SIDE PANEL .
• Refer to REMOVING LEFT AND RIGHT REAR REFLECTORS .
• Refer to REMOVING REAR BUMPER PANEL .

• Unlock the detents (1).
• Remove the ultrasonic sensor (2) and let it hang from the wiring harness.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the cover (1) along the dotted line on the detents (2) and remove it.

  Courtesy of BMW OF NORTH AMERICA, INC.