Installing the band elimination circuit

• Position the band elimination circuit (3)  .
• Tighten down screw (2)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Band elimination circuit to body
  Screw	tightening torque	3 Nm

• Connect connectors (1)  and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE HEADLINING ON THE LEFT OR RIGHT .
• Refer to INSTALLING THE RIGHT HANDS-FREE MICROPHONE .
• Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
• Refer to INSTALLING THE VANITY MIRROR LIGHT AT THE FRONT LEFT OR RIGHT .
• Refer to INSTALLING THE COUNTER SUPPORT FOR THE SUN VISOR .
• Refer to INSTALLING THE SUN VISOR .
• Refer to INSTALLING A-PILLAR TRIM PANEL .
• Refer to INSTALLING THE INTERIOR REARVIEW MIRROR .
• Refer to INSTALLING THE COVERS FOR THE INTERIOR REARVIEW MIRROR .
• Refer to INSTALLING REAR INTERIOR ROOF LIGHT .
• Refer to INSTALLING THE HOLDER ON LEFT OR RIGHT .
• Refer to INSTALLING THE UPPER B-PILLAR TRIM PANEL .
• Refer to INSTALLING C-PILLAR TRIM PANEL .
• Refer to INSTALLING D-PILLAR TRIM PANEL .
• Refer to INSTALLING THE HEADLINING ON THE LEFT OR RIGHT (WITH PANORAMA GLASS ROOF) .