Remove the tail light from the side panel on the left
Preliminary work
Removing the tail light on the side panel
- Open the bracket (3) of the warning triangle (1) and remove the warning triangle (1).
- Release the screw (2) and remove the bracket (3) of the warning triangle (1).
- Unclip the clip (1) with the special tool 2 298 505 .
- Unclip the cover (2) of the water channel.NOTE: RISK OF DAMAGE
Careless handling of tools and sharpened components .
Scratches, surface damage .- Protect working area.
- Handle tools and components carefully.
- Protect the body in the area of the rear light (3) with adhesive tape.
- Release the screw (1) of the tail light (3).
- Loosen the nuts (2) of the tail light (3).
- Remove the rear light (1) to the rear and unlock and disconnect the plug connection (2).