Installing the right front fog lamp

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing the fog light

Position the front fog lamp (3).
Tighten down screws (2).
TIGHTENING TORQUE SPECIFICATIONS

Fog light on bumper cover

Hexagon screw 3.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.
Connect plug (1).

Follow-up work

Refer to INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER .
Refer to PARTIALLY INSTALLING THE FRONT WHEEL ARCH TRIM .
Refer to MOUNTING THE WHEEL .
Refer to ADJUSTING FOG LIGHTS .