Installing the fog light

• Position the front fog lamp (3).
• Tighten down screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Fog light on bumper cover
  Hexagon screw	3.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect plug (1).

Follow-up work 

• Refer to INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER .
• Refer to PARTIALLY INSTALLING THE FRONT WHEEL ARCH TRIM .
• Refer to MOUNTING THE WHEEL .
• Refer to ADJUSTING FOG LIGHTS .