Remounting the LED module for the right daytime running lights

NOTE: Description is for left component only. Procedure on the right side is identical.

Remove the LED module for the daytime running lights

Courtesy of BMW OF NORTH AMERICA, INC.

Install the LED module for the daytime running lights

When replacing the LED module for the daytime running lights: Do not remount the guide sleeve (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Check the seal (1) on the LED module (2) for damage and replace as needed.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect connector (1) to LED module (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the LED module (2) in the headlight.
Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

LED module of daytime running lights
Screw	tightening torque	1.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.