Removing the left and right control units for the Front Light Electronics (FLEL and FLER)

NOTE: RISK OF DAMAGE
Electrostatic discharge .
Damage to or destruction of electrical components .

Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: 61 35... NOTES ON ELECTROSTATIC DISCHARGE (ESD) PROTECTION

NOTE: Description is for left component only. Procedure on the right side is identical.

Remove the Front Light Electronics control unit

Loosen screws (1).
Pull the Front Light Electronics (2) control unit out of the headlights.

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock and disconnect connector (1).
Remove the Front Light Electronics (2) control unit.

Courtesy of BMW OF NORTH AMERICA, INC.