Installing the control unit left and right for the front light electronics (FLEL and FLER)

Install the Front Light Electronics control unit 

• Check the seal (3) on the control unit for the Front Light Electronics (2) for damage and replace if necessary.
• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the control unit for the front light electronics (2) in the headlight.
• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to PROCESSING THE LED HEADLIGHT SERVICE TEST MODULE .