Install the LED module for the daytime running lights

• When replacing the LED module for the daytime running lights: Do not  remount the guide sleeve (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check the seal (1) on the LED module (2) for damage and replace as needed.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connector (1) to LED module (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the LED module (2) in the headlight.
• Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

LED module of daytime running lights
Screw	tightening torque	1.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.